Feeds ONE Generator
Models:
Honda EU1000iA2 and EU2000i
Yamaha EF1000isc,
Robin R1100 and R1700i
- Holds 6 gallons of gas.
Dimensions: 20"L x 11"W x 12"H
Unit sits level with generator. No elevation needed.
Incredible! This auxiliary tank can extend the
full-power output of your generator up to 30+ hours!
The Duration Tank can be filled before your adventure and
is completely safe for travel when full of fuel. It is easy to
use: simply disconnect your generator's cap, screw in the
special adapter and connect to the Duration Tank which is
DOT and USCG approved. Total installation time: 3
minutes. This tank adds 6 gallons to your gen's one gallon
tank and allows you to run for 7 times what you would
normally do with the internal tank alone. Great for keeping
the fridge cold all day and night, or for a weekend at the
cabin where no one will need to refill the generator's tank
the whole time. Unit is safe for travel or storage when full of
fuel with shutoff valves in fuel lines and cap breather.
Simply disconnect your generator's fuel cap, screw in the
adaptor and connect to the Duration EU Tank.
|
Feeds TWO Generator
Models:
Honda EU1000iA2 and EU2000i
Yamaha EF1000isc
Robin R1100 and R1700i
- Holds 6 gallons of gas.
Dimensions: 20"L x 11"W x 12"H
Unit sits level with generator. No elevation needed.
This product extends the full-power output of two
generators 15 hours each! It is safe for travel when full
of fuel. Simply disconnect your generators' caps, screw in
the adapters and connect to the Duration Double-Feed
which is DOT and USCG approved. Total installation time:
5 minutes.
For two parallel EU2000 units. You can use this on two
gens or just one, but if you are running two then you're
probably also using an air conditioner for comfort. This
Duration tank keeps you comfortable by not allowing more
running time between fillups and allows your system to run
4 times longer. Unit is safe for travel or storage when full of
fuel, with shutoff valves in all of the lines and cap breather.
Simply disconnect your generators' fuel caps, screw in the
injectors, replace your cap and you're good to go. Total
install time: 10 minutes.
|
