Hustler- Newest Model!
Super Z - SZ31KAW60XR7
$call for sale pricing$
(MSRP approx $12000)
|
|
Call 800-916-9473 for more information
We are open 7 days a week!
FREE Setup!
|
|
|
Specifications
Engine Kawasaki
Horsepower 31 hp
# of Cylinders 2
Displacement 725 cc
Compression Ratio 9.0 : 1
Desk Size 60 in
Maximum Torque 47.1 ft lbs @ 3000 rpm
Starter 12 volt
Ignition Electronic
Charging System 12 volt, 15 amp
Fuel Filter Replaceable, automotive style
Air Cleaner Heavy duty
Cooling Air Cooled, Fly Wheel fan
Governor Mechanical
Blade Tip Speed 18,400 fpm
Cutting Height 1.5-4.5 " (.25 increments)
Hydrostatic Drive V-Belt
Ground Speed Infinitely Variable 0-15 mph fwd, 0-7.5
mph Rev
Tires 13 x 6.5-6 rib tread, 24 x 12-12 turf tread
Fuel Capacity 14.4 us gal
Hydraulic Oil Capacity 2 gal
Seat Suspension Molded Vinyl w/ armrests
Flex Forks Standard
Cup Holder Std - 2 cups
Dimensions 78.80" L x 61"W x 39" H
Tire to Tire Width 51 in
Weight 1212 lbs (549.75 kgs)
|
|
Type Dual hydrostatic. Individual pumps power two direct-drive wheel
motors. Hydrostatic system operates on 10W40 motor oil. Super Z
features transmission drive (oil) cooler for increased system life.
Pumps Two variable displacement, axial-piston type. Each pump
powers one drive-wheel motor.
Pump Drive V-belt drive from engine crankshaft
Hydraulic Lines Stainless-steel, high-pressure lines with Parker Seal-Lok™ O-Ring Face-Seal fittings, Hydraulic lines
and fittings guaranteed to never leak!
Construction: Mainframe is 1.5 in x 3 in x .187 in (3.8 cm x 7.62
cm x .47 cm) rectangular steel tubing with internal gusset in frame bend
Drive motors mounted to .179 in (.45 cm) welded steel. Front caster wheels mounted with roller bearings on each
wheel. Front caster forks are .5 in (1.27 cm) steel
Deck Lift: Foot-operated deck height adjustment. Pin for setting height, detent for transport position
Controls: Hand-operated choke/throttle, ignition switch, electric mower clutch. Integrated parking brakes
Indicators: Hour meter, engine warning light
Cup Holder: Two cup holders molded into the left side fuel tank. Accommodates nearly any cup size including Big
Gulp™
Deck Type Free-floating mower using three blades with center blade to the
front. Mower is suspended at the corners. Includes 6 deck-mounted rollers
to improve flotation in rolling and uneven terrain.
Deck Lift Raise and lower deck from driver’s seat with simple footoperated deck height adjustment. Pin for setting
height, transport position. Change cutting heights, hop curbs and trailer more easily.
Construction 7 gauge deck plate with an 11-gauge deck plate doubler
with 7-gauge triplers at each spindle mount (nearly 1/2-in thick!) Solid 1-1/2 in x 1/2 in flat steel flat bars reinforce impact
areas on trim edges. 7-gauge reinforced front edge. Lifetime warranty on leading edge of deck.
Steel deck housing is 5.80 in (10.16 cm) deep to provide room for high capacity mowing. Molded rubber discharge chute.
Cutting Heights Foot-operated deck height adjustment. Pin for setting height, detent for transport position. Height
adjustment in .25 in increments from 1 in to 5 in (2.55 cm to 12.7 cm).
Blade Drive V-belt drive to all three spindles. Spring tension idler pulley.
Spindles Machine ductile housing, 1 in (2.5 cm) diameter high carbon
steel shafts and sealed ball bearings. 3-year warranty on spindle bearings.
Flotation Suspended mower floats on four spring-assisted chains. 6 antiscalp wheels are standard.
Discharge Chute Molded rubber. Over-center design allows for chute to be folded up for improved trailering or to pass
thru gates, etc.
|
|
|
|
 |
|
|
Showroom Location
Wise Equipment & Rental, Inc
1475 Rodenburg Rd
Schaumburg, Illinois 60193
Local: 847.895.5555
Toll Free: 800.916.9473
|
|
Showroom/Store Hours (CST)
Monday - 9am - 7pm
Tuesday - Friday 9am - 6pm
Saturday - 9am - 5pm
Sunday - 9am - 4pm
|
|
|
|
Phone Hours(CST)
Monday - Friday 7:30 am to 7:30 pm
Saturday & Sunday - 8:00am to 5:00pm
|
|
|
|
|
|
