Toro Full Size Zero Turn (ZTR)
74291
$6,999.99
|
|
Call 800-916-9473 for more information
We are open 7 days a week!
IN STORE SALES ONLY
NO SALES TAX! (except in Illinois)
|
|
|
 |
|
|
Toro Commercial ZTR
Baggers
$1799.99 w/ purchase of Full
Size ZTRs
|
|
|
|
Specifications
27 HP Engine Kohler® Command Pro
Air Filter Dual Stage Canister
Cutting Deck 7-gauge 52" deck with reinforcing deck guard
Spindle Housings Cast iron with 9-3/8" base
Spindle Bearings Ball bearings
Blades 1/4" thick alloy steel
Blade Tip Speed 18,500+ ft/min
Height of Cut 1-1/2" - 5" in 1/4" increments
Discharge Chute High-performance rubber
Carrier Frame 2" x 2" x 3/16" tubular steel
Ground Speed 8.5 mph forward; 5 mph rev
Hydraulic Pumps Hydro-Gear 10 cc/rev
Hydraulic Wheel Motors Parker 14.5 cir, 1-1/4" tapered shaft
Hydraulic Fluid Premium synthetic
Drive Tires 23" x 9.50-12"
Caster Tires 13" x 6.50-6"4-ply smooth pneumatic
Steering Controls 1-5/8" dia. levers; adjustable
Fuel Capacity Gas: 12 gallons
ROPS Folding; standard
|
|
A flat, crisp cut with precision blades. - 1/4" thick precision blades resist flexing to provide a flat, crisp cut.
High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated
with abrasive conditions.
Convenience and Comfort - Operator controls are conveniently grouped in a single location. Handy storage
compartment provides location for cell phone, tools, and more. Built-in cup holder provided.
7-gauge, high-strength steel - Constructed of high-strength 7-gauge steel (50,000 psi minimum yield strength), the
deck shell is extremely resistant to impacts and abrasion. At a full 5-1/2" deep, the deck has more than enough capacity
to handle the most demanding conditions.*Comparison based on 7-gauge high-strength steel versus 10-gauge steel
High-performance Discharge Chute - High performance 5/16" rubber discharge chute allows for close trimming
without damaging chute or landscape structures. Patented design provides exceptional clipping dispersion.
Folding Rollover Protection System ROPS - A Rollover Protection System (ROPS), complete with seat belt, comes
standard for operator protection in the case of accidental rollovers and tipovers. In situations where sufficient vertical
clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily unlocked and folded
down.
The industry's toughest spindle assembly - Rigorously tested to ensure that it can survive impacts that would
destroy lesser spindles. The cast iron housing, with a massive 9-3/8" diameter base, absorbs impact loads and
distributes them across a broader area of the robust deck shell.
Comprehensive Warranty* - 1 year Limited, 2 year Engine, Hydrostatic & Deck Shell and 3 year Spindle Assembly.**
**Third year parts only.
|
|
|
|
 |
|
|
|
Showroom Location
Wise Equipment & Rental, Inc
1475 Rodenburg Rd
Schaumburg, Illinois 60193
Local: 847.895.5555
Toll Free: 800.916.9473
|
|
Showroom/Store Hours (CST)
Monday - 9am - 7pm
Tuesday - Friday 9am - 6pm
Saturday - 9am - 5pm
Sunday - 9am - 4pm
|
|
|
|
Phone Hours(CST)
Monday - Friday 7:30 am to 7:30 pm
Saturday & Sunday - 8:00am to 5:00pm
|
|
|
|
|
|
