Sno-Way SW9 Spreader

• Spreader Capacity 9 cu. ft.
• Spreader Width Min/Max 4ft / 25ft
• Weight 140 lbs
• Height 46"
• Width 43"
• Depth(Length) 2"
• Motor 1/3 hp
• Spinner Diameter 12"

Features

Sno-Way Receiver Spreaders offer maximum value for every type of user. Designed with super
sidewall geometry, material is literally sucked into the spinner section. We incorporate
indestructible hoppers, adjustable deflectors, full shut off gates, and much more to ensure your
receiver spreader will work for every job and fit every budget.

- Form Fitting Poly Lid and Safety Retainer Strap - Sno-Way 6-Cu.-Ft. and 9-Cu.-Ft. receiver spreaders each have a large, form-fitting polyethylene lid to keep moisture out of the hopper and away from the spread material. The lid is easily secured using two rubber T-handle latches and - as a safety feature - a standard nylon retainer strap keeps the lid attached to the hopper at all times.

- Elevated Belt Reduction Drive Assembly- All Sno-Way receiver spreaders use a simple belt reduction drive assembly to transfer power from the electric motor to the spinner. The assembly is protected by a heavy-duty cover and mounted high away from the spread material (SW6 and SW9 only). Conveniently located, the belt drive tension can be adjusted easily and routine maintenance is a snap!

- High Mount External 12V Electric Motor - Sno-Way 6 and 9 receiver spreaders use a 1/3 HP, 12V DC electric motor to power the spinner. Mounted outside of the hopper and nearly 3' above the spinner, this sealed motor is controlled by either an ON/OFF rocker control or variable speed dial. Weatherproof electrical connectors and sturdy 10-gauge wire connect the motor to the controls.

- Fully Adjustable Directional Flow Control Paddles - Sno-Way's exclusive directional flow control paddles can be adjusted to completely shut-off spread material or fully opened for maximum flow. The paddles also direct the spread pattern. From zero to 180 degrees, you can direct the spread pattern at any angle without wasting expensive materials.

- Standard Class III Tapered Receiver Hitch - All Sno-Way receiver spreader models include a standard Class III tapered hitch. The square tube has an angled face for easy insertion into the receiver on the truck and two adjustment holes to accommodate deeper locking points. All hitches include a 5/8" diameter bent arm hole pinand spring pin lock.